Pipe Strainer

1. Nominal working pressure:PN16 2. backwash function 3. with high quality valve and pipings

DN:50-400

Material: cast iron, cast steel, stainless steel

The filter is installed at entrance of pipe, near to a flowmeter. Its main function is to filtrate particles contained in tested fluid, so as to ensure the flowmeter to be normally operating . As a piping accessory of home-made positive displacement meter with unified design (elliptic gear, roots flowmeter and helical rotor flowmeter), the filter can be used in multiple fluid conveying pipelines, especially in high precision flowmeter system, the filter is an indispensably auxiliary device.

 Main technical performance

1. Working pressure (MPa): 0.6, 1.0, 1.6, 2.5, 4.0, 6.3

2. Working temperature(°C): -20~100, 120~200

3. Medium viscosity(mPa.s): 500 for ordinary supply, more than 500 for special supply.

4. Material requirements: a) Casing: cast iron (A), cast steel (E) and corrosion-resisting steel (B and C)

                     b) Filtering screen: copper mesh and stainless wire screen

5. Applied standard: Q/JD2.005-2004

6. Flange standard :JB/T79~82-1994    GB/T9112-2000

7. Screw standard of limber hole:type Y filter: M27×1.5(M30×2.5 for high pressure)

type U filter M16×2, welding type filter M16×2

 Type

(1)Type Y : generally small DN filter;

(2)Type U:generally molten filter;

(3)Type H: generally welding filter;

(4)Type N: special type fetched in

 Selection reffernce

1)Type Y:nominal diameter of technical pipe          10~25mm

2) Type N,U,H:nominal diameter of technical pipe     40~500mm

Pipe Strainer